Dr. Shah Alimuzzaman Belal

Dr. Shah Alimuzzaman Belal

Professor

Department of Fabric Engineering
Faculty of Textile Engineering

sazaman@fe.butex.edu.bd

92 Shaheed Tajuddin Ahmed Avenue Tejgaon Industrial Area, Dhaka - 1208, Bangladesh

Education
Dr. Belal owns a very attractive record throughout his academic track. He has achieved his PhD from University of Manchester, UK in Textile Science and Technology. He has also obtained his Master of Philosophy (MPhil) in Textile Science and Technology from University of Manchester Institute of Science and Technology, UK. Prior to this, he completed Master of Science (MSc) in Textile Engineering from University of Ghent, Belgium with Honors marks. He had completed his B. Sc. In Textile Technology from University of Dhaka, Bangladesh with first class 2nd position.
Journal Publication

Nonwoven Polylactic Acid and Flax Biocomposites”, Polymer Composites, 2013, Volume 34, Issue 10, Page (1611 – 1619).

Impact Property of PLA/Flax Nonwoven Biocomposite”, Hindawi Publishing Corporation, Journal of Conference Papers in Materials Science, Volume 2013, Article ID 136861.

Three-Dimensional Nonwoven Flax Fibre Reinforced Polylactic Acid Biocomposites”, Polymer Composites, 2014, Volume 35, Issue 7, Page (1244 – 1252).

Biodegradability of Nonwoven Flax Fibre Reinforced Polylactic Acid Biocomposites”, Polymer Composites, 2014, Volume 35, Issue 11, Page (2094 – 2102).

A Novel Approach of Manufacturing Sustainable Seamless Jute Bags and Evaluation of Its Properties: A Comparative Study with Commercial Bags

Collagen/Nigella sativa/chitosan inscribed electrospun hybrid bio-nanocomposites for skin tissue engineering

Development of a biocomposite material using sugarcane bagasse and modified starch for packaging purposes

Effect of gamma radiation on mechanical properties of pineapple leaf fiber (PALF)-reinforced low-density polyethylene (LDPE) composites

Electrospun bio-nano hybrid scaffold from collagen, Nigella sativa, and chitosan for skin tissue engineering application

Enhancement of Thermo-mechanical Properties of Okra Fiber by Photografting Technique

Fabrication and Mechanical Performance of Non-Crimp Unidirectional Jute-Yarn Preform-Based Composites

Fabrication, properties, and performance of graphene-based textile fabrics for supercapacitor applications: A review

High performance short jute fibre preforms for thermoset composite applications

Improved mechanical properties of environmentally friendly jute fibre reinforced metal laminate sandwich composite through enhanced interface

Improvement of Elastic Property of Circular Weft Knit Three-Thread Fleece Fabric by Changing Stitch Length

Improvement of Physical, Mechanical and Thermal Properties of Okra Fiber/Polypropylene Composites by UV Radiation

Influence of Denting Order on Quality and Appearance of Cotton Based Plain Woven Fabric

Optimizing the Fabric Architecture and Effect of γ-Radiation on the Mechanical Properties of Jute Fiber Reinforced Polyester Composites

Performance Evaluation of PLA Based Biocomposites Reinforced with Photografted PALF

Short Jute Fiber Preform Reinforced Polypropylene Thermoplastic Composite: Experimental Investigation and Its Theoretical Stiffness Prediction

Sources, extractions and applications of bio-maker collagen–A review

Effects of Yarn, Fabric and Machine Parameters on the Dimensional Properties of Weft Knitted Single Jersey Fabric

Conference Papers

• Nonwoven Flax Fibre Reinforced PLA Biocomposites, 1st International Conference on Natural Fibres – Sustainable Materials for Advanced Applications, University of Minho, Guimaraes, Portugal, 9th, 10th and 11th June 2013.
• Mechanics of Loop Formation in Knitting, 1st International Textile Conference NED 2014, NED University of Engineering and Technology, Karachi, Pakistan, 13th March 2014.

Books

• Understanding Textiles for A Merchandiser, 2009. - Published by BMN Foundation, Dhaka, Bangladesh.
• Structure and analysis of cloth, - Published by Bangladesh Technical Education Board.
• Fabric Manufacturing Technology – III, - Published by Bangladesh Technical Education Board.

Researchs

Field of interest:

Having excellent research potential and an ability to actively contribute to the research projects goals as well as a proven publication track record Dr. Belal is able to interact with all researchers in a constructive, creative and professional manner during the processing, storing and logging process. At present he pays most of his attention in

• Developing base for technical textiles in Bangladesh
• Smart textiles
• Product diversification
• Sustainability in textiles sector

Dr. Belal owns a very attractive record throughout his academic track. He has achieved his PhD from University of Manchester, UK in Textile Science and Technology. He has also obtained his Master of Philosophy (MPhil) in Textile Science and Technology from University of Manchester Institute of Science and Technology, UK. Prior to this, he completed Master of Science (MSc) in Textile Engineering from University of Ghent, Belgium with Honors marks. He had completed his B. Sc. In Textile Technology from University of Dhaka, Bangladesh with first class 2nd position.

Nonwoven Polylactic Acid and Flax Biocomposites”, Polymer Composites, 2013, Volume 34, Issue 10, Page (1611 – 1619).

Impact Property of PLA/Flax Nonwoven Biocomposite”, Hindawi Publishing Corporation, Journal of Conference Papers in Materials Science, Volume 2013, Article ID 136861.

Three-Dimensional Nonwoven Flax Fibre Reinforced Polylactic Acid Biocomposites”, Polymer Composites, 2014, Volume 35, Issue 7, Page (1244 – 1252).

Biodegradability of Nonwoven Flax Fibre Reinforced Polylactic Acid Biocomposites”, Polymer Composites, 2014, Volume 35, Issue 11, Page (2094 – 2102).

A Novel Approach of Manufacturing Sustainable Seamless Jute Bags and Evaluation of Its Properties: A Comparative Study with Commercial Bags

Collagen/Nigella sativa/chitosan inscribed electrospun hybrid bio-nanocomposites for skin tissue engineering

Development of a biocomposite material using sugarcane bagasse and modified starch for packaging purposes

Effect of gamma radiation on mechanical properties of pineapple leaf fiber (PALF)-reinforced low-density polyethylene (LDPE) composites

Electrospun bio-nano hybrid scaffold from collagen, Nigella sativa, and chitosan for skin tissue engineering application

Enhancement of Thermo-mechanical Properties of Okra Fiber by Photografting Technique

Fabrication and Mechanical Performance of Non-Crimp Unidirectional Jute-Yarn Preform-Based Composites

Fabrication, properties, and performance of graphene-based textile fabrics for supercapacitor applications: A review

High performance short jute fibre preforms for thermoset composite applications

Improved mechanical properties of environmentally friendly jute fibre reinforced metal laminate sandwich composite through enhanced interface

Improvement of Elastic Property of Circular Weft Knit Three-Thread Fleece Fabric by Changing Stitch Length

Improvement of Physical, Mechanical and Thermal Properties of Okra Fiber/Polypropylene Composites by UV Radiation

Influence of Denting Order on Quality and Appearance of Cotton Based Plain Woven Fabric

Optimizing the Fabric Architecture and Effect of γ-Radiation on the Mechanical Properties of Jute Fiber Reinforced Polyester Composites

Performance Evaluation of PLA Based Biocomposites Reinforced with Photografted PALF

Short Jute Fiber Preform Reinforced Polypropylene Thermoplastic Composite: Experimental Investigation and Its Theoretical Stiffness Prediction

Sources, extractions and applications of bio-maker collagen–A review

Effects of Yarn, Fabric and Machine Parameters on the Dimensional Properties of Weft Knitted Single Jersey Fabric

• Nonwoven Flax Fibre Reinforced PLA Biocomposites, 1st International Conference on Natural Fibres – Sustainable Materials for Advanced Applications, University of Minho, Guimaraes, Portugal, 9th, 10th and 11th June 2013.
• Mechanics of Loop Formation in Knitting, 1st International Textile Conference NED 2014, NED University of Engineering and Technology, Karachi, Pakistan, 13th March 2014.

• Understanding Textiles for A Merchandiser, 2009. - Published by BMN Foundation, Dhaka, Bangladesh.
• Structure and analysis of cloth, - Published by Bangladesh Technical Education Board.
• Fabric Manufacturing Technology – III, - Published by Bangladesh Technical Education Board.

Field of interest:

Having excellent research potential and an ability to actively contribute to the research projects goals as well as a proven publication track record Dr. Belal is able to interact with all researchers in a constructive, creative and professional manner during the processing, storing and logging process. At present he pays most of his attention in

• Developing base for technical textiles in Bangladesh
• Smart textiles
• Product diversification
• Sustainability in textiles sector